HP OmniBook XE Battery

4400mAh, 14.8V, Li-ion HP OmniBook XE series battery replacement

One of three people found the following review helpful:

HP OmniBook XE Battery Maintenance and User Instructions

• A new battery usually maintains a discharged condition with very low capacity. It is highly recommended to fully charge new battery packs before using. You can refer to the users' guide of your electronic device for charging instructions.
• A new HP OmniBook XE laptop battery pack needs to be circled (fully discharged and recharged) three to five times to reach its optimum performance.
• Rechargeable HP OmniBook XE battery will undergo self-discharging when left unused for a long period of time. Thus, it should always be stored in a fully charged state and kept in a cool, dry and clean place.
• To maintain the optimum performance of a HP OmniBook XE battery pack, it is highly recommended to circle (fully discharging and recharging) it at least once a month.
• It is normal if the new HP XE battery gets warm when being charged or used. However, please pay special attention if the battery pack becomes excessively hot. This may indicate there is a problem with the charging circuit of the electronic device. Please consult a qualified technician if necessary.
• New batteries are hard to be charged. Sometimes, your electronic device may indicate a fully charged condition about 10 to 15 minutes when the new battery for HP OmniBook XE is being charged for the first time. When this happens, remove the battery pack and let it cool down for about 10 to 15 minutes then repeat the charging procedure. Sometimes, the new HP OmniBook XE battery will suddenly refuse to be charged. If this happens, a suggested solution is trying to remove the battery from the device and insert it again.